12 - 60 Tonne Marine Straddle Carriers

Crib Point Engineering design and manufacture Marine Straddle Carriers.
These Carriers can be either designed to suite your application or a vast range of existing 'standard' machines already exist.

MSC 25 MSC 40 MSC 50
   
LIFT CAPACITY (kg) 25,000
INSIDE WIDTH (mm) 5,020
OUTSIDE WIDTH (mm) 6,690
FINGER PIER WIDTH (mm) 4,930
INSIDE HEIGHT (mm) 5,090
OVERALL HEIGHT (mm) 5,900
MAXIMUM SLING (mm) 4,780
MINIMUM SLING (mm) 980
WHEEL BASE (mm) 4,500
HOIST SPEED (m/mm) 6
TRAVEL SPEED (m/mm) 60/125
APROX MACHINE WEIGHT (kg) 10,000
LIFT CAPACITY (kg) 40,000
INSIDE WIDTH (mm) 5,450
OUTSIDE WIDTH (mm) 7,100
FINGER PIER WIDTH (mm) 5,330
INSIDE HEIGHT (mm) 5,750
OVERALL HEIGHT (mm) 6,650
MAXIMUM SLING (mm) 5,900
MINIMUM SLING (mm) 1,500
WHEEL BASE (mm) 5,300
HOIST SPEED (m/mm) 6
TRAVEL SPEED (m/mm) 60/125
APROX MACHINE WEIGHT (kg) 12,000
LIFT CAPACITY (kg) 50,000
INSIDE WIDTH (mm) 6,100
OUTSIDE WIDTH (mm) 7,820
FINGER PIER WIDTH (mm) 6,060
INSIDE HEIGHT (mm) 6,100
OVERALL HEIGHT (mm) 7,000
MAXIMUM SLING (mm) 6,900
MINIMUM SLING (mm) 2,900
WHEEL BASE (mm) 6,700
HOIST SPEED (m/mm) 46/94
TRAVEL SPEED (m/mm) 50/110
APROX MACHINE WEIGHT (kg) 24,000

Features

  • All hoist systems are fully independent.
  • Machines Designed for ease servicing and long jevity.
  • Polyester boat slings reducing stretch with improved safety factor
  • Two speed hoist and wheel drives available on all models above 40 tonne capacity.
  • Live load weighing system on all models above 40 tonne capacity.
  • Smooth efficient winch and transmission control.
  • Fast lift speed.
  • Winches fitted with dual fail safe system.
  • Direct drive gear box and fail safe brake unit integral to winches and wheels eliminating chain slack and maintenance.
  • Front and rear independent sling adjustment from the operators platform.
  • Cross beam pivot bearing eliminating stress in frame when travelling over uneven ground.
  • Operators control platform easily accessible with ergonomic control layout
  • Frame constructed from prime grade certified steel.
  • Forward mounted cross beam.
  • Frame sizes to meet boats of the 2000's.
  • Underslung power pack for easy access.
  • Hydraulic test points for fault finding.
  • Components chosen for their quality and availability.
  • Stainless steel components including hydraulic tubing, operator control panel, exhaust system, fasteners.
  • Galvanised wire ropes for long life.
  • 90 degree 'Ackerman' steering.
  • High performance zinc epoxy marine paint system.
  • Over load alarms.
  • Engine Warning and protection systems. 
  • Closed circuit TV on request.
  • Cabin Heaters on request
  • Remote Radio Control Fully proportional