60-150 Tonne Marine Straddle Carriers

Crib Point Engineering design and manufacture Marine Straddle Carriers. These Carriers can be either designed to suite your application or a vast range of existing 'standard' machines already exist.

SPECIFICATIONS OF STANDARD MACHINES

 

MSC 075 MSC 080 MSC 100 MSC 150
       
LIFT CAPACITY (kg) 65,000
INSIDE WIDTH (mm) 6,620
OUTSIDE WIDTH (mm) 8,360
FINGER PIER WIDTH (mm) 6,560
INSIDE HEIGHT (mm) 6,800
OVERALL HEIGHT (mm) 7,700
MAXIMUM SLING (mm) 7,000
MINIMUM SLING (mm) 3,000
WHEEL BASE (mm) 7,258
HOIST SPEED (m/mm) 4/10
TRAVEL SPEED (m/mm) 55/86
APROX MACHINE WEIGHT (kg) 25,000
LIFT CAPACITY (kg) 80,000
INSIDE WIDTH (mm) 7,200
OUTSIDE WIDTH (mm) 9,280
FINGER PIER WIDTH (mm) 6,960
INSIDE HEIGHT (mm) 7,500
OVERALL HEIGHT (mm) 8,400
MAXIMUM SLING (mm) 7,640
MINIMUM SLING (mm) 3,640
WHEEL BASE (mm) 7,300
HOIST SPEED (m/mm) 3/7.5
TRAVEL SPEED (m/mm) 30/65
APROX MACHINE WEIGHT (kg) 30,000
LIFT CAPACITY (kg) 100,000
INSIDE WIDTH (mm) 8,200
OUTSIDE WIDTH (mm) 10,650
FINGER PIER WIDTH (mm) 8,000
INSIDE HEIGHT (mm) 8,600
OVERALL HEIGHT (mm) 9,500
MAXIMUM SLING (mm) 10,140
MINIMUM SLING (mm) 3,540
WHEEL BASE (mm) 9,500
HOIST SPEED (m/mm) 3/7.5
TRAVEL SPEED (m/mm) 30/65
APROX MACHINE WEIGHT (kg) 40,000
LIFT CAPACITY (kg) 150,000
INSIDE WIDTH (mm) 9,370
OUTSIDE WIDTH (mm) 12,730
FINGER PIER WIDTH (mm) 9,180
INSIDE HEIGHT (mm) 9,200
OVERALL HEIGHT (mm) 10,260
MAXIMUM SLING (mm) 12,200
MINIMUM SLING (mm) 5,300
WHEEL BASE (mm) 10,600
HOIST SPEED (m/mm) 2/5
TRAVEL SPEED (m/mm) 25/60
APROX MACHINE WEIGHT (kg) 65,000

Features

 
  • All hoist systems are fully independent.
  • Machines Designed for ease servicing and long jevity.
  • Polyester boat slings reducing stretch with improved safety factor
  • Two speed hoist and wheel drives available on all models above 40 tonne capacity.
  • Live load weighing system on all models above 40 tonne capacity.
  • Smooth efficient winch and transmission control.
  • Fast lift speed.
  • Winches fitted with dual fail safe system.
  • Direct drive gear box and fail safe brake unit integral to winches and wheels eliminating chain slack and maintenance.
  • Front and rear independent sling adjustment from the operators platform.
  • Cross beam pivot bearing eliminating stress in frame when travelling over uneven ground.
  • Operators control platform easily accessible with ergonomic control layout
  • Frame constructed from prime grade certified steel.
 
  • Forward mounted cross beam.
  • Frame sizes to meet boats of the 2000's.
  • Underslung power pack for easy access.
  • Hydraulic test points for fault finding.
  • Components chosen for their quality and availability.
  • Stainless steel components including hydraulic tubing, operator control panel, exhaust system, fasteners.
  • Galvanised wire ropes for long life.
  • 90 degree 'Ackerman' steering.
  • High performance zinc epoxy marine paint system.
  • Over load alarms.
  • Engine Warning and protection systems. 
  • Closed circuit TV on request.
  • Cabin Heaters on request.