Marine Equipment


Crib Point Engineering’s fabrication shop includes the following :

  • Profile cutting of all metals.
  • Hot and cold plate rolling.
  • Guillotine and plate presses – 3780 (8ft).
  • Hard face and reclamation work.
  • Welding:- (GMAW or MIG), (GTAW or TIG), MMAW, FCAW & OXY.  
  • Low current (sheet work) and high current high duty cycle machines on hand.
  • Two overhead travelling cranes 40 tonne total capacity (4 hooks) (9.2m clear).
  • 500 tonne capacity Slipway at the rear of the boiler shop.
  • Ability to completely open rear of factory to allow movement of large projects.
  • 465 Square meters of fabrication shop floor space.

Special purpose machine frame being fabricated

A 40 tonne sections of a 120 tonne fabrication

Machine base plate. Ready to be moved to the machine shop.